Do you need a fuseboard upgrade at your Esher home? Or are you wondering how to tell if you need a fuseboard upgrade? At Precision Electrical Services, we carry out numerous fuseboard upgrades in Esher and the surrounding area. Our highly experienced, fully qualified electricians are here to tell you more about fuseboard upgrades and why you may need one.
Signs you need a fuseboard upgrade
Your fuseboard is a key part of your Esher homes electrical system, keeping you safe from electrical fire or shock and distributing power around your home. It is in continuous use which makes wear and tear inevitable. On average a fuseboard should last for around 20 to 30 years. After this it’s very likely a replacement will be required. It is recommended that an EICR electrical inspection is carried out every 10 years at your Esher home. Amongst other areas that are checked, this will ensure your fuseboard is up to the challenge and safe for continued use. In between these regular inspections, there are a few things to look out for that may indicate it is time for a fuseboard upgrade at your Esher home.
These can include:
- Flickering lights
- Tripping electrics
- Hot sockets & switches
- Popping, crackling, or sizzling noises
- Green goo leaking from sockets/switches/light fittings.
If you notice any of these signs, you should call in your local electrician as soon as possible. They will make sure your home is not in any immediate danger and advise if a fuseboard upgrade is needed. If you are based in Esher or the surrounding area, our qualified electricians at Precision Electrical Services will be happy to attend.
Why do I need to upgrade my fuseboard?
As we previously mentioned, the fuseboard at your Esher home is in continual usage and like anything else, this use can cause it to degrade. This degradation can cause your fuseboard to be slow to react, or even fail to react, to a fault. This leaves you and your family at risk. It is vitally important for your safety that your fuseboard is upgraded as soon as it begins to wear.
Some of the serious issues that can occur with an aging fuseboard include:
- Problems with overloading: Older, outdated fuseboards can easily be overloaded by the sheer number of electrical devices we use in our daily lives. Overloading occurs when too many electrical appliances are used simultaneously, causing the circuit to overheat. Older fuseboards were not designed with the power demands of modern life in mind. When a fuseboard suffers from overload, you will have frequent tripping occurring and the risk of fire is increased.
- Green goo appearing: Green goo is the result of a reaction between decaying plasticiser and copper conductors of PVC cables. You can see evidence of it in the fuseboard itself and around your sockets and switches. Don’t touch the goo (no, we are not sure why anyone would want to!) but contact your local electrician as soon as possible.
- Higher risk of electrical shocks & fires: As your fuseboard ages past its prime there is a greater risk of electrical shocks and fires occurring. This is due to slower reaction times and damage to the board. Older fuseboards are also unlikely to have additional protection devices such as RCDs. These newer protective devices are literal lifesavers and no home should be without one.
Fuseboard Upgrade Electrician in Esher
Precision Electrical Services are your reliable, local electrician in Esher. We specialise in fuseboard upgrades and have a wealth of experience in domestic electrical services. Our team of electricians are NICIEC approved, fully qualified and our services come highly recommended by our many satisfied customers. If your home is due for a fuseboard upgrade, get in touch with our friendly team today!
